 |
Here's the Simple 1, 2, 3, Paint over StrongArm Brand Process for frame touchup
on an XS-650 that's been parked in the garage for years...
Taking the rusted Rat off your bike has never been easier.
Shown
is the area of the frame prior to the painting which is outlined with a
red line. The area where the frame sections are joined has now rusted
while the motorcycle has been in storage for years.. The Rat is on the
bike right here.
1)
A small streak of StrongArm Brand is applied over the rusted surface in
one swoop over the surface. The total amount used is less than a
teaspoon to cover the areas, and none of the material is lost into the
air as pollution, which is what happens with other products, that only
come out with a hair spray mist. ALL StrongArm Brand Sprayers are
designed to apply the product directly into the work without wasting it.
2) The area is brushed with a regular wire brush lightly with a dozen strokes or so.
3)
Wipe the area down with a fresh clean cotton rag to pick up loosened
material and rust. Turn the rag over and wipe any remaining rust.
Shown
here is plain black touchup paint which will match the color of the
frame. The frame area which is now treated with StrongArm Brand and
100% ready for painting.
Painting
over the area now shows how nicely the paint applies over the StrongArm
Brand treated surface. StrongArm Makes the paint adhere to the surface
better than if washed dry with thinners.
All
Done. The area is painted and is now air drying in the sun. Note how
nice the finish is and looks compared to before. This entire process
take less than FIVE minutes from start to finish.
 |
|
Pro Industrial Hosting Powerhouse
MacWebLab.Com